EuroCast 3011 - Mineral Filled Casting Epoxy2 component system, Part A epoxy resin reacts rapidly withPart B to form a rigid epoxy resin.Mixing ratio by weight: 10:1 ApplicationsEuroCast 3011 has been formulated for use in castingsections up to 50mm where a tough, rigid, machinableproduct is required.  The pot life of the mixed system allowsit to be fully degassed and poured carefully producingsubstantially bubble-free castings.PLEASE NOTE: In thick section this product becomes hotduring cure. This can increase shrinkage and, if not degassedcan result in slight expansion. Ensure moulds are made of asuitable material to withstand this temperature.If in doubt please contact CompositesWarehouseDirect.Com SpecificationGel Time (100g 20°C): Minimun 35-Maximum 140 MinutesDemould Time (100g 20°C): Minimun 2-Maximum 6 HoursFull Cure (100g 20°C): Minimun 12-Maximum 24 HoursHardness at full cure ( Shore D): Minimun 85-Maximum 95Colour: Part A White(unless pigmented), Part B clear strawSpecific Gravity: Part A 1.6, Part B 1.01, Mixed 1.5