EuroGel 3026 - Aluminium-Filled Epoxy Gel Coat
2 component system, Part A epoxy resin reacts with Part B
hardener to form a thixotropic rigid epoxy resin.
Mixing ratio by weight: 12.5:1
Applications
EuroGel 3026 has been formulated for use when casting patterns and moulds where a tough, rigid, machinable mould surface is required. EuroGel 3026 may be used in conjunction with EuroCast 3024 casting epoxy to eliminate any chance of voids or deformations appearing in the mould face due to shrinkage. The fully cured gelcoat product shows excellent temperature resistance of approximately
150°C, depending on mould geometry.
EuroGel 3026 is also compatible with EuroLam 3038 or 3048 Laminating Epoxy Tooling Resins to obtain a tough composite GRP structure, using a variety of different weight Fibreglass to achieve the correct weight of part.
Specification
Pot Life (100g 20°C): 90 Minutes
Gel Time (100g 20°C): 135 MinutesFull Cure (100g 50°C): 24 Hours
Full Cure (100g 80°C): 16 Hours
Hardness at full cure ( Shore D): 88
Colour: Part A Grey, Part B Clear, Mixed Grey
Specific Gravity: Part A 1.75, Part B 0.93, Mixed 1.7