top of page

EuroGel 3081 - Glass Filled Epoxy Gel Coat

2 component system, EuroGel 3081 (Glass Filled) Part A epoxy resin reacts with Part B hardener to form a thixotropic rigid epoxy resin.

Mixing ratio by weight: 10:1

Mixing ratio by volume: 6:1

 

Applications
EuroGel 3081 (Glass Filled) has been formulated for use when casting patterns and moulds where a tough, rigid, abrasion-resistant mould surface is required. EuroGel 3081 (Glass Filled) may be used in conjunction with EuroLam 3038 laminating epoxy resin, when used with Glass fibre or backed up with EuroCast 3077 Glass filled casting epoxy resin to eliminate any chance of voids or deformations appearing in the mould face due to shrinkage.

The fully cured gelcoat product shows excellent temperature resistance of approximately 150°C, depending on mould geometry.

 

Specification

Pot Life (100g 20°C): 80 minutes

Gel Time (100g 20°C): 100 minutes

Demould Time (100g 50°C): 3 hours

Full Cure (100g 50°C): 24 hours

Full Cure (100g 80°C): 16 hours

Hardness at full cure (Shore D): 88

Colour: Part A Grey, Part B Clear, Mixed Grey

Specific Gravity: Part A 1.6, Part B 0.95, Mixed 1.6-1.7

EuroGel 3081 - Glass Filled Epoxy Gel Coat

SKU: EG00004
£50.50Price
Only 4 left in stock
    bottom of page