EuroLam 3048 - Laminating Epoxy Tooling Resin
2 component system, EuroCast 3048 Part A epoxy resin
reacts with Part B hardener to form a clear rigid epoxy
suitablefor laminating and similar applications.
Mixing ratio by weight: 2:1
 
Applications
EuroCast 3048 has been formulated for use in laminating,
casting and coating applications where a clear, low viscosity
system is required, producing tough, rigid products.
The long pot life and low viscosity of the mixed system
allows it to be fully degassed if required.
 
PLEASE NOTE: In thick section this product becomes hot
during cure. This can increase shrinkage and, if not degassed
can result in slight expansion. Ensure moulds are made of a
suitable material to withstand this temperature.
If in doubt please contact CompositesWarehouseDirect.com
 
Specification
Gel Time (100g 20°C): 4.5 Hours
Demould Time (100g 20°C):  24 Hours
Full Cure (100g 20°C): 7 Days
Colour: Part A Clear, Part B Clear, Mixed Water Clear
Specific Gravity: Part A 1.17, Part B 1.01, Mixed 1.1
 
Physical Properties
Hardness at full cure - no reinforcement (Shore D): 84